NewYouGo.NeuNano Banana 2.1Erstelle Bilder oder bearbeite eine Vorlage mit einer Ausgabe bis zu 4K.
ErstellenKI-BilderzeugungKI-VideoerstellungKI-MusikerstellungBildbearbeitungHintergrund entfernenBilder hochskalierenHintergründe stapelweise entfernenIndividuelle LoRA-Stile
FürRücke eine Marke in den Fokus.Gib deiner Geschichte eine neue Welt.Erschaffe etwas, das Gehör verdient.Gestalte deinen eigenen Look.
EntdeckenInspirationKreative MöglichkeitenModelleHotel Lobby AI GeneratorHotel Lobby AI kostenlos
RessourcenGalerieBlogDokumentationPreiseHotel Lobby AI GeneratorHotel Lobby AI kostenlosKontaktDatenschutzerklärungNutzungsbedingungenStudio öffnen
PreiseKlein-Bildstudio

NEWYOUGO

Was möchtest du erschaffen?

Wähle einen Ausgangspunkt. Entdecke, wohin dich deine Idee führt.

Über dieses Modell

P-Video

Gerenderte Clips

Deine neuesten Ausgaben erscheinen hier, sobald der Job abgeschlossen ist.

Beispielvideo
0:00 / 0:00

Noch keine Clips

Starte mit einem Prompt und fuege bei Bedarf Bild oder Audio hinzu.

Schnelle Videogenerierung

Mit P-Video werden Prompts, Frames und Audio zu Bewegung

P-Video ist fuer schnelle kreative Iteration gebaut. Starte mit guenstigen Drafts, fuehre den Clip ueber Bild oder Audio und wechsle auf 1080p, sobald der Shot steht.

Text zu VideoBild zu VideoAudio zu VideoDraft1080p48 FPS
~10 s
Typische Zeit fuer einen 5-Sekunden-Clip in 720p
4x
Schnellere Vorschauen mit Draft
7
Unterstuetzte Seitenverhaeltnisse
Eine Seite fuer schnelle Tests, sprechende Avatare und sauberere Final-Exporte.
Erst Draft, dann Final

Ein Studio fuer schnelle Video-Iteration

Diese Seite macht aus P-Video einen saubereren Produkt-Workflow: Bewegung schnell testen, zwischen Text, Bild und Audio wechseln und spaeter auf bessere Ausgabequalitaet gehen, ohne Anbieterkomplexitaet offenzulegen.

Von Draft zu Final
Pruefe zuerst Timing und Framing, dann wechsle in die Standardqualitaet.
Audio-gesteuerte Shots
Lade Musik, Sprache oder Rhythmusreferenzen hoch und steuere damit den Clip direkt.
Start- und Endframe kontrollieren
Fixiere die Oeffnung mit einem Bild und guide den letzten Frame mit einer Zielreferenz.

Beispiele aus echten Runs

Diese Beispiele zeigen, wo P-Video besonders stark ist: Nahaufnahmen, audio-gesteuerte Clips und kurze Iterationsschleifen.

Sprechender Avatar mit Gitarre

Geeignet fuer Lip Sync und Nahaufnahme-Performance mit klarem Audio.

Action-Shot aus einem Einzelbild

Starte von einem Frame und pushe Bewegung und Kamera ueber den Prompt.

Schneller Performance-Test

Draft hilft beim Timing-Check vor dem saubereren Finalrender.

P-Video workflow, step by step

Lock the look with a seed frame, test motion with quick 720p draft previews, then switch draft mode off for the final render at the same framing.

P-Video workflow at a glance

P-Video on this page runs Text to Video, Image to Video, and Audio to Video in one Studio. Duration can be set from 1 to 20 seconds. Draft Mode is the preview pass. Turning it off is the final pass, up to 1080p and 48 FPS. Keep the same start image and aspect ratio when you move from draft to final, so the shot you approved is the shot you export.

StepSetting in StudioGoal
1. InputImage to Video (or Audio to Video)Fix subject and look
2. Seed frameUpload a still; optional last frameConsistency, planned ending
3. DraftDraft Mode on, 720p, about 5sCheck timing and motion
4. IterateOne change per draftIsolate what works
5. FinalDraft off, up to 1080p / 48 FPSCleaner deliverable
6. VariantsAspect ratio 9:16 / 1:1 / 16:9Placements

Step 1 — Choose your input mode

Studio offers three modes: Text to Video, Image to Video, and Audio to Video. Text to Video is the start when you only have a description. Image to Video is the usual path for product motion and character clips, because one still fixes the subject and the opening frame before any motion is generated. Audio to Video is the path for a talking avatar or a music-led edit, where the file should set the timing.

Choose the mode before you stretch the prompt. An image keeps identity and framing close to that still. Audio keeps rhythm close to the upload. Text leaves both of those open.

Step 2 — Prepare a seed frame

Upload one still as the starting frame. Use a clear subject, a simple background, and the crop you want in the first second. If the clip needs a planned ending, add a last-frame reference. Studio can use that last frame for a landing shot, such as a product finishing in a set pose or a face landing on a set expression.

Match the still to the aspect ratio you will render. A vertical image in a widescreen frame asks the model to invent the side edges.

Step 3 — Draft pass

Turn Draft Mode on. Keep resolution at 720p and duration short, about 5 seconds. This page describes a typical 5-second 720p clip as rendering in about 10 seconds. Use the draft to judge timing and motion, not as the file you publish.

Draft previews cost much less than a full render. The Studio shows the credit cost for the settings you have selected.

Step 4 — Iterate

Change one thing per draft: prompt wording, camera direction, or pacing. If you change the still, the prompt, and the duration together, you cannot tell which change fixed the shot.

Watch the first second, the middle, and the last second. Faces, hands, and product edges are the usual places a short draft shows a problem.

Step 5 — Final render

Turn Draft Mode off once pacing, camera direction, and framing are settled. Raise resolution up to 1080p. When the placement needs smoother motion, use up to 48 FPS. Keep the same start image, aspect ratio, and core prompt so the final clip follows the draft you approved.

Leave on the option to keep generated or conditioned audio when the export should include that sound.

Step 6 — Variants

From the same direction, change the aspect ratio for each placement. Use 9:16 for vertical, 1:1 for square, and 16:9 for widescreen. Studio also offers 4:3, 3:4, 3:2, and 2:3.

Check the first and last frames after a ratio change. A tighter crop can cut off the subject the seed frame was holding. If the crop changes a lot, run that variant as a draft first.

Audio-led workflow

For a talking avatar or a music clip, switch to Audio to Video. Upload a clear speech or music file, and add an optional start frame when the face or product should stay close to a chosen still.

Keep generated or conditioned audio in the export if that track should ship with the video. Draft the timing at 720p, then turn Draft Mode off for the final render at the same framing.

Credits: how cost changes

Cost depends on resolution, duration, and draft mode. Drafts cost much less. The Studio shows the credit cost for your current settings before you render (160 credits at the default settings when we checked). Confirm the figure on the page before you run.

New accounts receive 4 trial credits, and those credits work only on some models, so do not treat P-Video as a free generator. Credit packs are listed on the pricing page.

When to use another model

Stay with P-Video when a still or an audio file should lead a short clip and you want a draft before the final render. Use another model when the job is different.

Use Seedance 2 Fast when the motion should follow a reference video or a music track. Use Grok Imagine Video when you want text, image, or source-video guidance with native audio. Use LTX-2 on the AI Video Generator for a simple text-to-video or image-to-video pass on the default video page.

FAQ

How long can a P-Video clip be?

Studio duration runs from 1 to 20 seconds.

What resolution and frame rate can I use?

Draft the shot at 720p. The final render can go up to 1080p and 48 FPS.

How many credits does a clip cost?

The Studio shows the cost for your settings. Draft previews cost much less than a full render. Confirm the number before you run. The pricing page lists the Studio default.

When should I turn draft mode off?

Turn it off once pacing, camera direction, and framing are settled and you want the cleaner export.

Can I keep the audio?

Yes. Studio includes an option to keep generated or conditioned audio in the export.

What setup works for a talking avatar?

Use Audio to Video with a clear audio file, and add an optional start frame when the face should match a chosen still.

Warum P-Video gut in Workflows mit hoher Iteration passt

Es ist kein langsames Labormodell fuer komplexe cineastische Erzaehlung. Es ist staerker, wenn Ideen schnell getestet, Nahaufnahmen konsistent gehalten und Previews rasch in Finals ueberfuehrt werden muessen.

Ein Endpoint fuer drei Flows

Text, Bild und Audio zu Video auf derselben Modellseite.

Draft-first Iteration

Erst Tempo und Komposition pruefen, dann in bessere Qualitaet gehen.

Audio-sensible Bewegung

Stimme oder Musik koennen das Timing direkt fuehren.

Formate fuer mehrere Placements

Querformat, Hochformat und Quadrat in derselben Modellfamilie.

Wo P-Video am meisten bringt

Am staerksten ist es bei kurzen, klaren Clips, in denen Motivkonsistenz, Tempo und schnelles Re-Rendering wichtiger sind als komplexe Multi-Scene-Erzaehlung.

Stark fuer Nahaufnahmen mit klarer Stimme, Face-to-Camera-Content und kurze Dialogszenen.

Haeufige Fragen

Die wichtigsten Punkte, wenn du P-Video als schnelles Produktionsmodell bewertest.






Starte deinen naechsten Kurzclip mit P-Video

Nutze P-Video, wenn du schnellere Creative-Loops, bessere Nahaufnahme-Dynamik und einen saubereren Uebergang von Preview zu Final brauchst.

P-Video-Workflow: Schritte vom Entwurf zum Finalclip | NewYouGo