P-Video
Clips rendus
Tes dernieres sorties apparaissent ici des que le rendu est termine.
Aucun clip pour le moment
Commence par un prompt, puis ajoute une image ou un audio si necessaire.
Transforme prompts, images et audio en mouvement avec P-Video
P-Video sert avant tout a iterer vite. Commence par des apercus peu couteux, guide le plan depuis une image fixe ou un audio, puis monte en 1080p quand la prise est validee.
Un studio pense pour l'iteration video rapide
Cette page transforme P-Video en flux plus lisible : tester le mouvement vite, passer du texte a l'image ou a l'audio, puis monter en qualite sans exposer la complexite fournisseur.
Exemples issus de vraies generations
Ces clips montrent les cas ou P-Video est le plus utile : sujets en gros plan, action guidee par l'audio et boucles de test tres courtes.
Avatar chantant avec guitare
Bon cas pour lip sync et performance proche avec image et audio clairs.
Plan anime depuis une image
Pars d'un seul cadre et pousse le mouvement avec le prompt.
Test rapide de performance
Le mode draft aide a verifier le tempo avant le rendu propre.
P-Video workflow, step by step
Lock the look with a seed frame, test motion with quick 720p draft previews, then switch draft mode off for the final render at the same framing.
P-Video workflow at a glance
P-Video on this page runs Text to Video, Image to Video, and Audio to Video in one Studio. Duration can be set from 1 to 20 seconds. Draft Mode is the preview pass. Turning it off is the final pass, up to 1080p and 48 FPS. Keep the same start image and aspect ratio when you move from draft to final, so the shot you approved is the shot you export.
| Step | Setting in Studio | Goal |
|---|---|---|
| 1. Input | Image to Video (or Audio to Video) | Fix subject and look |
| 2. Seed frame | Upload a still; optional last frame | Consistency, planned ending |
| 3. Draft | Draft Mode on, 720p, about 5s | Check timing and motion |
| 4. Iterate | One change per draft | Isolate what works |
| 5. Final | Draft off, up to 1080p / 48 FPS | Cleaner deliverable |
| 6. Variants | Aspect ratio 9:16 / 1:1 / 16:9 | Placements |
Step 1 — Choose your input mode
Studio offers three modes: Text to Video, Image to Video, and Audio to Video. Text to Video is the start when you only have a description. Image to Video is the usual path for product motion and character clips, because one still fixes the subject and the opening frame before any motion is generated. Audio to Video is the path for a talking avatar or a music-led edit, where the file should set the timing.
Choose the mode before you stretch the prompt. An image keeps identity and framing close to that still. Audio keeps rhythm close to the upload. Text leaves both of those open.
Step 2 — Prepare a seed frame
Upload one still as the starting frame. Use a clear subject, a simple background, and the crop you want in the first second. If the clip needs a planned ending, add a last-frame reference. Studio can use that last frame for a landing shot, such as a product finishing in a set pose or a face landing on a set expression.
Match the still to the aspect ratio you will render. A vertical image in a widescreen frame asks the model to invent the side edges.
Step 3 — Draft pass
Turn Draft Mode on. Keep resolution at 720p and duration short, about 5 seconds. This page describes a typical 5-second 720p clip as rendering in about 10 seconds. Use the draft to judge timing and motion, not as the file you publish.
Draft previews cost much less than a full render. The Studio shows the credit cost for the settings you have selected.
Step 4 — Iterate
Change one thing per draft: prompt wording, camera direction, or pacing. If you change the still, the prompt, and the duration together, you cannot tell which change fixed the shot.
Watch the first second, the middle, and the last second. Faces, hands, and product edges are the usual places a short draft shows a problem.
Step 5 — Final render
Turn Draft Mode off once pacing, camera direction, and framing are settled. Raise resolution up to 1080p. When the placement needs smoother motion, use up to 48 FPS. Keep the same start image, aspect ratio, and core prompt so the final clip follows the draft you approved.
Leave on the option to keep generated or conditioned audio when the export should include that sound.
Step 6 — Variants
From the same direction, change the aspect ratio for each placement. Use 9:16 for vertical, 1:1 for square, and 16:9 for widescreen. Studio also offers 4:3, 3:4, 3:2, and 2:3.
Check the first and last frames after a ratio change. A tighter crop can cut off the subject the seed frame was holding. If the crop changes a lot, run that variant as a draft first.
Audio-led workflow
For a talking avatar or a music clip, switch to Audio to Video. Upload a clear speech or music file, and add an optional start frame when the face or product should stay close to a chosen still.
Keep generated or conditioned audio in the export if that track should ship with the video. Draft the timing at 720p, then turn Draft Mode off for the final render at the same framing.
Credits: how cost changes
Cost depends on resolution, duration, and draft mode. Drafts cost much less. The Studio shows the credit cost for your current settings before you render (160 credits at the default settings when we checked). Confirm the figure on the page before you run.
New accounts receive 4 trial credits, and those credits work only on some models, so do not treat P-Video as a free generator. Credit packs are listed on the pricing page.
When to use another model
Stay with P-Video when a still or an audio file should lead a short clip and you want a draft before the final render. Use another model when the job is different.
Use Seedance 2 Fast when the motion should follow a reference video or a music track. Use Grok Imagine Video when you want text, image, or source-video guidance with native audio. Use LTX-2 on the AI Video Generator for a simple text-to-video or image-to-video pass on the default video page.
FAQ
How long can a P-Video clip be?
Studio duration runs from 1 to 20 seconds.
What resolution and frame rate can I use?
Draft the shot at 720p. The final render can go up to 1080p and 48 FPS.
How many credits does a clip cost?
The Studio shows the cost for your settings. Draft previews cost much less than a full render. Confirm the number before you run. The pricing page lists the Studio default.
When should I turn draft mode off?
Turn it off once pacing, camera direction, and framing are settled and you want the cleaner export.
Can I keep the audio?
Yes. Studio includes an option to keep generated or conditioned audio in the export.
What setup works for a talking avatar?
Use Audio to Video with a clear audio file, and add an optional start frame when the face should match a chosen still.
Pourquoi P-Video s'integre bien aux flux a forte iteration
Ce n'est pas un modele lent pour narration cinematographique complexe. Il est plus utile quand il faut tester vite, garder une bonne coherence sur des sujets proches et passer rapidement du preview au rendu final.
Un endpoint pour trois flux
Texte, image et audio vers video depuis une seule page.
Iteration en mode draft
Teste d'abord composition et rythme, puis monte en qualite.
Mouvement sensible a l'audio
La voix ou la musique peuvent guider le plan sans dependre seulement du texte.
Formats adaptes a plusieurs placements
Horizontal, vertical et carre dans la meme famille de modele.
Ou P-Video apporte le plus de valeur
Il est le plus fort sur des clips courts et clairs, la ou la coherence du sujet, la vitesse et les rerendus rapides comptent plus qu'une narration multi-scenes.
Questions frequentes
Les questions les plus utiles pour evaluer P-Video comme modele de production rapide.
Lance ton prochain clip court avec P-Video
Utilise P-Video si tu veux des boucles creatives plus rapides, de meilleurs gros plans et un passage plus fluide du preview au rendu final.
