NewYouGo.NuevoNano Banana 2.1Crea imágenes o edita una referencia con salida de hasta 4K.
CrearGeneración de imágenes con IAGeneración de video con IAGeneración de música con IAEdición de imágenesEliminador de fondosAmpliador de imágenesEliminador de fondos por lotesEstilos LoRA personalizados
ParaDale protagonismo a una marca.Dale a tu historia un mundo nuevo.Crea algo que merezca escucharse.Crea tu propio estilo.
ExplorarInspiraciónPosibilidades creativasModelosGenerador Hotel Lobby AIHotel Lobby AI gratis
RecursosGaleríaBlogDocumentaciónPreciosGenerador Hotel Lobby AIHotel Lobby AI gratisContactoPolítica de privacidadTérminos de servicioAbrir estudio
PreciosEstudio de imágenes Klein

NEWYOUGO

¿Qué vas a crear?

Elige por dónde empezar. Descubre adónde te lleva tu idea.

Acerca de este modelo

P-Video

Clips renderizados

Tus resultados mas recientes aparecen aqui cuando termina la tarea.

Vídeo de ejemplo
0:00 / 0:00

Aun no hay clips

Empieza con un prompt y, si hace falta, anade imagen o audio antes de renderizar.

Generacion rapida de video

Convierte prompts, fotogramas y audio en movimiento con P-Video

P-Video esta pensado para iteracion creativa rapida. Empieza con borradores baratos, guia el clip desde una imagen o un audio subido y pasa a 1080p cuando la toma ya funciona.

Texto a videoImagen a videoAudio a videoDraft1080p48 FPS
~10 s
Tiempo tipico para un clip de 5 s en 720p
4x
Previsualizaciones mas rapidas con draft
7
Relaciones de aspecto disponibles
Una misma pagina para pruebas rapidas, avatares parlantes y renders finales mas limpios.
Primero draft, despues final

Un estudio pensado para iterar video mas rapido

Esta pagina empaqueta P-Video dentro de un flujo mas claro: probar movimiento rapido, alternar entre texto, imagen y audio, y escalar a una salida mejor sin exponer complejidad de proveedor.

Del borrador al render final
Usa draft para validar ritmo y encuadre; despues cambia a calidad estandar.
Tomas guiadas por audio
Sube musica, voz o referencias ritmicas para condicionar el clip desde el mismo formulario.
Control del primer y ultimo fotograma
Ancla la apertura con una imagen y guia el cierre con una referencia final.

Ejemplos de ejecuciones reales

Estos clips muestran donde P-Video funciona mejor: cercania de sujeto, accion guiada por audio y ciclos cortos de prueba y refinamiento.

Avatar parlante con guitarra

Buen ajuste para lip sync y actuacion cercana con imagen y audio claros.

Plano de accion desde una sola imagen

Parte de un unico fotograma y empuja movimiento y camara con el prompt.

Prueba rapida de interpretacion

Draft ayuda a validar tempo antes del render limpio.

P-Video workflow, step by step

Lock the look with a seed frame, test motion with quick 720p draft previews, then switch draft mode off for the final render at the same framing.

P-Video workflow at a glance

P-Video on this page runs Text to Video, Image to Video, and Audio to Video in one Studio. Duration can be set from 1 to 20 seconds. Draft Mode is the preview pass. Turning it off is the final pass, up to 1080p and 48 FPS. Keep the same start image and aspect ratio when you move from draft to final, so the shot you approved is the shot you export.

StepSetting in StudioGoal
1. InputImage to Video (or Audio to Video)Fix subject and look
2. Seed frameUpload a still; optional last frameConsistency, planned ending
3. DraftDraft Mode on, 720p, about 5sCheck timing and motion
4. IterateOne change per draftIsolate what works
5. FinalDraft off, up to 1080p / 48 FPSCleaner deliverable
6. VariantsAspect ratio 9:16 / 1:1 / 16:9Placements

Step 1 — Choose your input mode

Studio offers three modes: Text to Video, Image to Video, and Audio to Video. Text to Video is the start when you only have a description. Image to Video is the usual path for product motion and character clips, because one still fixes the subject and the opening frame before any motion is generated. Audio to Video is the path for a talking avatar or a music-led edit, where the file should set the timing.

Choose the mode before you stretch the prompt. An image keeps identity and framing close to that still. Audio keeps rhythm close to the upload. Text leaves both of those open.

Step 2 — Prepare a seed frame

Upload one still as the starting frame. Use a clear subject, a simple background, and the crop you want in the first second. If the clip needs a planned ending, add a last-frame reference. Studio can use that last frame for a landing shot, such as a product finishing in a set pose or a face landing on a set expression.

Match the still to the aspect ratio you will render. A vertical image in a widescreen frame asks the model to invent the side edges.

Step 3 — Draft pass

Turn Draft Mode on. Keep resolution at 720p and duration short, about 5 seconds. This page describes a typical 5-second 720p clip as rendering in about 10 seconds. Use the draft to judge timing and motion, not as the file you publish.

Draft previews cost much less than a full render. The Studio shows the credit cost for the settings you have selected.

Step 4 — Iterate

Change one thing per draft: prompt wording, camera direction, or pacing. If you change the still, the prompt, and the duration together, you cannot tell which change fixed the shot.

Watch the first second, the middle, and the last second. Faces, hands, and product edges are the usual places a short draft shows a problem.

Step 5 — Final render

Turn Draft Mode off once pacing, camera direction, and framing are settled. Raise resolution up to 1080p. When the placement needs smoother motion, use up to 48 FPS. Keep the same start image, aspect ratio, and core prompt so the final clip follows the draft you approved.

Leave on the option to keep generated or conditioned audio when the export should include that sound.

Step 6 — Variants

From the same direction, change the aspect ratio for each placement. Use 9:16 for vertical, 1:1 for square, and 16:9 for widescreen. Studio also offers 4:3, 3:4, 3:2, and 2:3.

Check the first and last frames after a ratio change. A tighter crop can cut off the subject the seed frame was holding. If the crop changes a lot, run that variant as a draft first.

Audio-led workflow

For a talking avatar or a music clip, switch to Audio to Video. Upload a clear speech or music file, and add an optional start frame when the face or product should stay close to a chosen still.

Keep generated or conditioned audio in the export if that track should ship with the video. Draft the timing at 720p, then turn Draft Mode off for the final render at the same framing.

Credits: how cost changes

Cost depends on resolution, duration, and draft mode. Drafts cost much less. The Studio shows the credit cost for your current settings before you render (160 credits at the default settings when we checked). Confirm the figure on the page before you run.

New accounts receive 4 trial credits, and those credits work only on some models, so do not treat P-Video as a free generator. Credit packs are listed on the pricing page.

When to use another model

Stay with P-Video when a still or an audio file should lead a short clip and you want a draft before the final render. Use another model when the job is different.

Use Seedance 2 Fast when the motion should follow a reference video or a music track. Use Grok Imagine Video when you want text, image, or source-video guidance with native audio. Use LTX-2 on the AI Video Generator for a simple text-to-video or image-to-video pass on the default video page.

FAQ

How long can a P-Video clip be?

Studio duration runs from 1 to 20 seconds.

What resolution and frame rate can I use?

Draft the shot at 720p. The final render can go up to 1080p and 48 FPS.

How many credits does a clip cost?

The Studio shows the cost for your settings. Draft previews cost much less than a full render. Confirm the number before you run. The pricing page lists the Studio default.

When should I turn draft mode off?

Turn it off once pacing, camera direction, and framing are settled and you want the cleaner export.

Can I keep the audio?

Yes. Studio includes an option to keep generated or conditioned audio in the export.

What setup works for a talking avatar?

Use Audio to Video with a clear audio file, and add an optional start frame when the face should match a chosen still.

Por que P-Video encaja bien en trabajo de iteracion alta

No es un laboratorio lento para secuencias cinematograficas complejas. Funciona mejor cuando importa probar ideas rapido, mantener consistencia en primeros planos y pasar de preview a salida final sin friccion.

Un endpoint, tres flujos

Texto a video, imagen a video y audio a video desde la misma pagina.

Iteracion con draft

Primero valida composicion y ritmo; luego sube calidad.

Movimiento sensible al audio

La musica o la voz pueden guiar el clip sin depender solo del texto.

Formatos para varios placements

Horizontal, vertical y cuadrado dentro de la misma familia.

Donde P-Video destaca mejor

Brilla en clips cortos y concretos donde la consistencia del sujeto, la velocidad y la re-renderizacion rapida pesan mas que una narracion compleja de varias escenas.

Ideal para planos cercanos con voz clara, presentaciones a camara o interpretacion guiada por dialogo.

Preguntas frecuentes

Puntos clave para evaluar P-Video como modelo rapido de produccion.






Empieza tu siguiente clip corto con P-Video

Usa P-Video si necesitas bucles creativos mas rapidos, mejor control en primeros planos y una transicion limpia entre preview y render final.

Flujo de P-Video: pasos del borrador al clip final | NewYouGo